logo

Ürün ayrıntıları

Created with Pixso. Evde Created with Pixso. Ürünler Created with Pixso.
Çevresel Test Odasında Yürümek
Created with Pixso.

IEC 60068 Compliant -40℃~130℃ Walk-in Constant Temperature And Humidity Test Chamber

IEC 60068 Compliant -40℃~130℃ Walk-in Constant Temperature And Humidity Test Chamber

Marka Adı: Sinuo
Model Numarası: SN881C-9.7F
Adedi: 1
fiyat: Customized
Ödeme Şartları: T/T
Tedarik Yeteneği: Ayda 10 Takım
Ayrıntılı Bilgiler
Menşe yeri:
Çin
Sertifika:
Calibration Certificate (Cost Additional)
soğutma yöntemi:
Su Soğutmalı
Sıcaklık Aralığı:
-40°~130°C
Nem Çözünürlüğü:
0.01 bağıl nem
Nem aralığı:
Standart: %20 RH~%95 RH
Sıcaklık Çözünürlüğü:
0.01 ℃
Yük Kapasitesi:
1 kW ısı yükü
ısıtma oranı:
≤3,0°C/dak (doğrusal olmayan, yüksüz)
Soğutma oranı:
Ortalama 1.0 ℃/dk (doğrusal olmayan, yük yok)
Ambalaj bilgileri:
kontrplak
Yetenek temini:
Ayda 10 Takım
Ürün Tanımı
IEC 60068 Compliant -40℃~130℃ Walk-in Constant Temperature And Humidity Test Chamber

Product Application

The Walk-in Constant Temperature and humidity Test Chamber is designed to expose products, components, and materials to controlled temperature and humidity environments to evaluate their performance and reliability under various conditions. This equipment is widely used in environmental simulation and reliability testing for electrical and electronic products, as well as other industrial components and materials. It supports constant high/low temperature testing, temperature/humidity cycling tests, and gradual temperature/humidity change tests.

IEC 60068 Compliant -40℃~130℃ Walk-in Constant Temperature And Humidity Test Chamber 0

Complied Standards & Clauses

This constant temperature and humidity test chamber conforms to the following IEC standards and clauses:

• IEC 60068-2-1: Environmental testing – Part 2-1: Tests – Test A: Cold

• IEC 60068-2-2: Environmental testing – Part 2-2: Tests – Test B: Dry heat

• IEC 60068-2-3: Environmental testing – Part 2-3: Tests – Test Ca: Damp heat, steady state

• IEC 60068-2-30: Environmental testing – Part 2-30: Tests – Test Db: Damp heat, cyclic (12 h + 12 h cycle)

Safety Test Restrictions

The following samples are not permitted to be tested or stored in this chamber:

• Flammable, explosive, or highly volatile substances

• Corrosive substances, biological samples

• Samples with strong electromagnetic emission sources

Technical Parameters

Volume and Dimensions

Effective Volume

9.7F

Internal Chamber Dimensions

W2200*H2000*D2200 mm

External Dimensions

Approx. W2650×H2950×D2900 mm

Performance Specifications

Cooling Method

Water-cooled

Temperature Range

-40°~ 130℃

Humidity Range

Standard: 20%RH~95%RH

Temperature /Humidity Fluctuation

±2℃/±2.0%RH

Temperature Resolution

0.01℃

Humidity Resolution

0.01RH

Temperature Uniformity

≤2℃

Humidity Uniformity

≤75%RH: ±3%RH; >75%RH: ±5%RH

Heating Rate

≤3.0℃/min (non-linear, no load)

Cooling Rate

Average 1.0℃/min (non-linear, no load)

Load Capacity

1 kW heat load

Temperature and Humidity Diagram

IEC 60068 Compliant -40℃~130℃ Walk-in Constant Temperature And Humidity Test Chamber 1 PS: Standard humidity range: 20% ~ 95%RH

Operating Conditions

Ambient temperature

-5℃ ~ +28℃

Relative humidity

≤ 85%RH

Atmospheric pressure

80kPa ~ 106kPa

Power supply

380V AC (±10%), three-phase lines + protective earth wire

Grouding Resistance

≤ 4Ω

Total power

approx. 100kW

Maximum working current

approx. 152A