logo

Ürün ayrıntıları

Created with Pixso. Evde Created with Pixso. Ürünler Created with Pixso.
EVSE Test Cihazları
Created with Pixso.

EV Charging Cable Pull Force Torque Tester PLC Touch Screen Control

EV Charging Cable Pull Force Torque Tester PLC Touch Screen Control

Marka Adı: Sinuo
Model Numarası: SNQC1007B
Adedi: 1
Ödeme Şartları: T/T
Tedarik Yeteneği: Ayda 10 SET
Ayrıntılı Bilgiler
Menşe yeri:
Çin
Sertifika:
Calibration Certificate (Cost Additional)
Kontrol çalışma modu:
PLC otomatik kontrol, dokunmatik ekran çalışması
Tork uygulama süresi:
0-99H59M59S, önceden ayarlanabilir
Çekme Uygulama:
160n, 200n, 240n, 250n, 500n
Tork uygulamak:
0.6n • m, 0.7n • m, 1.4n • m, 2.7n • m, 5.4n • m, 11.0n • m, 16.3n • m
Tork tekerleği:
R100mm(Ф200mm) ±0,5mm
Çekme frekansı:
1 kez/s
Ambalaj bilgileri:
İhracat paketi
Yetenek temini:
Ayda 10 SET
Vurgulamak:

EV charging station torque tester

,

cable anchorage pull force tester

,

EVSE testing equipment torque tool

Ürün Tanımı


 

Electric Vehicle Charging Station Cable Anchorage Pull Force and Torque Test Apparatus

 

Complied Standards & Clauses


 

It is designed and manufactured according to IEC 61851-1:2017 clause 11.6.


Product Overview


 

Samples and restrictions: Electric vehicle charging station

Test purpose: Used to test the ability of electric vehicle charging station connection cable accessories to withstand specified tension and torque

Test Principle: The pulling force is realized by using a motor to drive an eccentric wheel mechanism or a screw mechanism. The motor speed is adjustable to ensure that the pulling force is applied accurately each time. The torque is realized by using a motor, a tray, a weight and a time relay.

Structure and characteristics: The weight is used to apply tension, and the weight and the torque arm realize torque. The PLC is used to control the number of tensions and the torque test time. When the number of tests or the test time is reached, the equipment automatically stops. After the test, the maximum allowable displacement of the charging gun connector cable shall not exceed the standard requirement value.

 

Technical Parameters


 

 

Test content Supply plug and/or vehicle plug cable of EV charging station tension test and torque test
Equipment structure schematic diagram

Refer Schematic

 

EV Charging Cable Pull Force Torque Tester PLC Touch Screen Control 0

Control operation mode PLC automatic control, touch screen operation
Drive mode Electric
Pull apply Meet 160N, 200N, 240N, 250N, 500N specifications, realized by superposition of weights
Torque apply Meet 0.6N·m, 0.7N·m, 1.4N·m, 2.7N·m, 5.4N·m, 11.0N·m, 16.3N·m specifications,realized by superposition of weights
Torque wheel R100mm(Ф200mm) ±0.5mm
Tensile frequency 1 time/s, the actual pull time is detected by electrical signal
Pull cycles 1-999999 cycles, can be preset, default is 100±1 cycles
Torque application time 0-99H59M59S,can be preset
Power failure protection With power-off data storage memory function
Fixture Universal clamp, one set
Weight matching selection table EV Charging Cable Pull Force Torque Tester PLC Touch Screen Control 1
 
 

Details


 

EV Charging Cable Pull Force Torque Tester PLC Touch Screen Control 2EV Charging Cable Pull Force Torque Tester PLC Touch Screen Control 3